Sony MHS-CM5/V bloggie™ Handbook - Page 15
Preparing the battery pack - memory card
UPC - 027242788855
View all Sony MHS-CM5/V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting started 1 Preparing the battery pack Power/Charge lamp USB connection support cable (supplied) AC Adaptor Power cord (Mains lead) 1 Open the battery/memory card cover and insert the battery pack into this camera, then close the cover. • Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks. 2 Connect the camera to the computer that is turned on with the USB connection support cable (supplied). • The Power/Charge lamp lights up in orange, and charging starts. • When the Power/Charge lamp turns off, charging is finished. • The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10 to 30°C.) 3 When charging is finished, disconnect the USB connection support cable from the USB jack of your camera. b Notes • While the camera is connected to a computer, you cannot operate the camera. Be sure to disconnect the camera before operation. • Charging the battery with customized or hand-built computers is not guaranteed. Depending on the type of USB device used, charging may not function properly. • Do not apply force to the camera, when you connect the camera to a computer. This may cause damage to the camera or the computer. • When you connect the camera to a notebook computer that is not connected to an AC power source, the battery of the notebook computer may be depleted rapidly. Do not leave the camera connected to the computer for a long time. • You cannot open the battery/memory card cover when a tripod is attached to the camera. 15