Sony MKS-R1620 Operating Instructions - Page 17
Configuring Using the Buttons, Attaching a key label
View all Sony MKS-R1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching a key label Attach the key labels to the buttons using the following procedure. 1 Grip the holes on the button sides with the key-top puller and remove the button. Setting the default IP address Simultaneously press buttons 1 and 2, then turn the power on. For details about the IP address setting, refer to the Installation Manual. Resetting the software Press and hold the bottom two function buttons (PROT button and LOCK (CHOP) button by default on the MKSR3210/R1620, PROT button and ENTRY button by default on the MKS-R1630) simultaneously for three seconds or longer. The software is reset, and the unit returns to the same status as when power is first turned on. 2 Grip the slots on the sides of the white button cap with the key-top puller, so that the cap flexes slightly, and remove the cap. 3 Insert the key label, and replace the button cap. 4 Replace the button in its original location. For details about the key-cap puller (part number: 4-592-03601), consult your Sony representative. Configuring Using the Buttons Basic settings of the unit can be configured using the web menu, but the following settings can also be configured directly on the unit. The following items can be set on the unit by turning the power on while pressing a combination of source/destination selection buttons, as described below. Number of the source/destination selection buttons MKS-R3210 1234 17 18 19 20 5678 21 22 23 24 9 10 11 12 25 26 27 28 13 14 15 16 29 30 31 32 MKS-R1620 1234 5678 9 10 11 12 13 14 15 16 MKS-R1630 12 9 10 34 11 12 56 13 14 78 15 16 17