Sony MKS-R1620 Operating Instructions - Page 29

Destination Key Display Mode (Not available on the MKS-R3210) Changes the display of operation buttons for which only a destination is configured. Destination Name: Display the destination name, regardless of the source/destination selection mode state. XPT Source Name: Display the crosspoint status (source name) in source selection mode, and displays the destination name in destination selection mode. • "..." is displayed when a crosspoint is not connected. • Displays the topmost level in level breakaway state. • Displays the source with the lowest number if multiple sources exist. Both(2-Line Display): Display both the source name and destination name on two lines, regardless of the source/destination selection mode state. The source/destination display position is determined by the [Destination Position in Status Display] setting. The inverted display position is determined by the [Invert Display Position] setting. Invert Display Position (Not available on the MKS-R3210) When [Both(2-Line Display)] is selected in [Destination Key Display Mode] to display the source name and destination name on two lines in the MKS-R1620 display window or MKS-R1630 selection button, this sets which line is displayed inverted. Top: Invert the top line. Bottom: Invert the bottom line. Dest Position(Status & Dest Key) (Not available on the MKS-R3210) When [Both(2-Line Display)] is selected in [Destination Key Display Mode] to display the source name and destination name on two lines in the MKS-R1620 display window or MKS-R1630 selection button, this sets which line displays the destination. Also, when displaying the source name and destination name on two lines in the MKS-R1630 status display window, this sets which line displays the destination. Top: Display the destination on the top line. Bottom: Display the destination on the bottom line. Breakaway Breakaway Display Mode Top Level: Display the crosspoints of the top level only. All Level: Display the crosspoints of all levels. Breakaway Color Set the color of buttons when a different source is selected for each level (or color displayed in button block on the MKS1620). Same as Color Settings: Display the color configured using [Color Settings] in [Display Settings]. 1: Displays white. 2: Displays amber. 3: Displays yellow. 4: Displays green. 5: Displays purple. 6: Displays light blue. 7: Displays dark blue. 8: Displays pink. Alias Priority Main LCD Display Priority #1 to #8 (Enabled only on MKS-R1630) Set whether the base name or alias name has priority for display as the connector name in the status display window. The status display window has several display modes, and up to five connector names can be displayed in each display mode. BASE: Display the base name. 1 to 8: Display the Alias1 to Alias8 name. Sub LCD Display Priority Select the base name or alias name for the connector names to display in the display window and preset display window. BASE: Display the base name. 1 to 8: Display the Alias1 to Alias8 name. Retrace Settings Page Use to configure the function for tracing the crosspoint status display and to display the source names of sources. 1 Enter data in the [Retrace Settings] table. 2 Press the [+] icon in [Retrace Settings] to open the [Retrace] dialog. 3 Enter the destination and source combination and levels to trace. 4 Press [Apply] to save the settings. To cancel the registration, press [Cancel]. Linkage Settings Page Use to configure the panel link function to link multiple remote control panels. You can combine remote control panels in a group and link them by setting one panel as the parent panel and the others as child panels. Stand Alone Select to use a remote control panel in standalone mode. Child Select to use a remote control panel as a child panel using the panel link function. Authorized: Displays the authorization state from the parent. "a" is displayed in green when authorized ("Not authorized" is displayed when not authorized). Shared: Displays the status of data sharing with the parent. Displayed in green when data is shared successfully ("Not shared" is displayed when data is not shared). • Parent IP Address 1: Set the IP address of the LAN1 side on the parent device. "a" is displayed in green on the right when communication is established with the parent on LAN1. • Parent IP Address 2: Set the IP address of the LAN2 side on the parent device. "a" is displayed in green on the right when communication is established with the parent on LAN2. 29