Sony MV7101DS Operating Instructions - Page 7

Operation for playback ./> /y m/M DISPLAY POWER 12 45 78 TOP MENU SEARCH 3 CLEAR 6 90 SUBTITLE MENU ENTER ANGLE AUDIO SETUP VOL MONITOR INPUT POWER x u To Do this Stop playback Press x*1 Eject the disc Open the front panel, then press Z on the unit. Pause Press u *2 Resume playback after pause Press u Go to the next chapter, Press > track, or scene in continuous play mode Go back to the preceding Press . chapter, track, or scene in continuous play mode Fast forward Press M/y while playing*3 *4 Fast reverse Press /m while playing*3 *4 Slow forward Press M/y in (DVD/Video CD only) pause*4 Slow reverse (DVD only) Press /m in pause *1 If the resume playback function is activated, you can resume playback later by pressing u. For details, see "Resuming playback." *2 DVD/Video CD Both the picture and sound stop during pause and "PAUSE" is displayed on the screen. Audio CD The sound stops and "PAUSE" is displayed on the screen. *3 DVD/Video CD/Audio CD Playback increases to 4 times the speed with no sound. *4 A disc other than a DVD returns to normal playback when a track/MP3 file finishes. Notes • Depending on the recording method used on the disc, it may take a minute or more before playing. • Depending on the condition of the disc, it may not play back (page 38). • If you play a high-bit rate MP3 file such as 320 kbps, sound may be intermittent. Returning the display monitor to its enclosure Close the display monitor until it clicks. The monitor turns off automatically. Notes • Be careful not to catch your finger in the display monitor when closing. • Do not put any foreign objects between the LCD panel and the enclosure when closing. Adjusting the tilt and swivel The display monitor can be adjusted within the angles shown. 120˚ 180˚ 30˚ Tip Before closing the display monitor, make sure that the monitor is turned and facing the enclosure (you will hear a click). 7