Sony MZ-M200 Operating Instructions - Page 60
Setting for recorder display EL Light, Setting for quick mode Quick Mode, Setting for
UPC - 027242693401
View all Sony MZ-M200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Setting for recorder display ("EL Light") Notes • Even when "EL Light" is set to "Auto Off", the display window will not turn off while: - the recorder is being used with the AC power adaptor. - charging the rechargeable battery. - the recorder is connected to a computer. - a menu item is being selected. - the recorder is fast forwarding, fast rewinding, or using AMS. - the Divide Rehearsal function is being performed. - messages are displayed. • If the battery grows weak during recording (the level indication appears as ), the display window darkens to conserve battery power regardless of the "EL Light" setting. • The operation lamp does not turn off even when "EL Light" is set to "Auto Off". Setting for quick mode ("Quick Mode") Note When "Quick Mode" is set to "On" ("Quick On" on the remote), power continues to flow in the recorder even when it is not being operated. The power is automatically cut off when the batteries become drained. Setting for disc mode ("Disc Mode") Notes • Even if you select "MD" as the "Disc Mode" setting, the operation mode can only be "Hi-MD" when using a 1GB Hi-MD disc. • The operation mode set in the "Disc Mode" menu is applied to a blank 60/74/80-minute standard disc used on the recorder even if a different operation mode was selected in the SonicStage software or a different operation mode appeared on the display after the disc was formatted by the SonicStage software. Setting for the /LINE OUT jack ("Audio Out") Notes • If "Audio Out" is set to "Line Out", Virtual Surround, 6-Band Equalizer, or Dynamic Normalizer will not function. • "Audio Out" cannot be set to "Line Out" when the remote is connected. • When you connect the headphones/earphones directly to the recorder, make sure to set "Audio Out" to "Headphone". • When "Audio Out" is set to "Line Out", do not connect the headphones/earphones. The sound from the headphones/earphones will be very loud. • If the recorder is connected to a component such as an active speaker and "Audio Out" is set to "Headphone", make sure to set "Beep" to "Off" ("Beep Off" on the remote). 60