Sony MZ-M200 Operating Instructions - Page 64
Symptom, Case and/or corrective action, The SonicStage or MD Simple Burner software is active. Close
UPC - 027242693401
View all Sony MZ-M200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Symptom The rechargeable battery cannot be charged sufficiently through USB bus power. The installation was not successful. The installation appears to have stopped before it has completed. The progress bar on the display is not moving or the access lamp has not lit for a few minutes during the installation. You cannot record audio data when you press and slide the REC switch while using the MD Simple Burner software. Even though the recorder is recognized by the computer, it does not operate normally. The recorder cannot be used as a storage device. The playing time of a transferred track is different from the time that appears on your computer monitor. Case and/or corrective action If you operate the recorder while it is connected to a computer, it takes time for the rechargeable battery to be sufficiently charged by USB bus power. For faster charging, do not operate the recorder. You are using an OS that does not support this software ( page 19). All windows applications are not closed. If you start the installation while other programs are running, a malfunction may occur. This is especially true for programs that require large amounts of system resources, such as virus-check software. There is not enough hard disk space on your hard disk. You need 200 MB or more free space on your hard disk. Check for the appearance of an error message beneath the installation window. Press the [Alt] key or [Tab] key to display any message that has appeared, and then follow the displayed instructions. If there is no message, the installation is still in progress. Wait a little while longer. The installation is progressing normally. Please wait. The installation may take 30 minutes or more, depending on your CD drive or system environment. The recorder is not correctly connected to the computer. Connect the recorder and your computer correctly using the USB cable. Audio CD is not inserted in CD drive of the computer. Insert Audio CD. The capacity of the disc is insufficient. Insert another disc. A USB hub is used. Connect the USB cable directly to the USB port of the computer. You are using the recorder at a place with vibration. Use the recorder at a place with no vibration. The SonicStage or MD Simple Burner software is active. Close the SonicStage or MD Simple Burner software. This is due to a calculation discrepancy between the recorder and the computer. 64