Sony MZ-R900 Operating Instructions - Page 24
To start/stop recording in sync with the source player (Synchrorecording), End ¢¢7
![]() |
View all Sony MZ-R900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
To start/stop recording in sync with the source player (Synchro-recording) You can easily make digital recordings of a digital source on an MD. Before synchro-recording, make connections to the digital source with a digital cable, and insert a recordable MD. CD players, etc. REC x 1 Slide SYNCHRO REC to ON. End ¢¢7 Synchro-recording indication " SYNC" appears in the display. " SYNC" does not appear if optical cable is not connected to the recorder. 2 Press and slide REC to the right. The recorder stands by for recording. 3 Play the source sound. The recorder starts recording when it receives the playing sound. To stop recording, press x z • You cannot pause manually during synchro- recording. • When there is no sound from the player for about 3 seconds during synchro-recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro-recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically. • For longer recording; follow step 1 of " Recording for long times" (page 23) to select the recording mode, and then start the procedure of synchro-recording. Notes • Do not switch SYNCHRO REC while recording. Recording may not be done properly. • Even when there is no recorded sound on the sound source, there may be cases when recording does not pause automatically during synchro-recording due to the noise level emitted from the sound source. • If a silent portion is encountered for approximately 2 seconds during synchrorecording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends. • Synchro-recording cannot be done if the connecting cord is not an optical cable, or if the cable is connected to the MIC (PLUG IN POWER) jack. • You cannot manually change the recording level or the recording mode during synchrorecording. 24-GB
![](/manual_guide/products/sony-mzr900-operating-instructions-560560e/24.png)