Sony MZ-R900 Operating Instructions - Page 29

Display window on the recorder A B A B Track number Elapsed time Track number1) Remaining time for recording Numbers of tracks Remaining time after the current after the current track2) location Current date3) Current time3) 1) If the track is labeled, " " appears in the display followed by the track name (appears only when " RecRemain" is selected while stopped). 2) If the disc is labeled, " " appears in the display followed by the disc name (appears only when " AllRemain" is selected while stopped). 3) Appears only when the clock is set (appears only when " Clock" is selected). z The display that appears on the remote control is different from the ones on the recorder. See " On the remote control" (page 29) to check the display that appears on the remote control. To know the recording condition The indicator lights up or flashes according to the recording condition. Recording condition REC indicator While recording lights up flashes according to the loudness of the source while recording with a microphone (voice mirror) Recording standby flashes Recording condition REC indicator Less than 3 minutes' recording time available flashes slowly A track mark has been added (when controlling by the recorder only) goes off momentarily z If you want to check the playing position or track name while playing, see page 40. On the remote control DISPLAY 1 Press DISPLAY while recording or in stop mode. Each time you press the button, the display changes as follows. Display window on the remote control C D Indication C/D While recording Track number/Elapsed time r Track number/Remaining time for recording r - /Current time1) 1)Appears only when the clock is set. continued 29-GB