Sony MZ-R900 Operating Instructions - Page 63
The AUDIO OUT parameter is set to LINE OUT ., Digital Sound
![]() |
View all Sony MZ-R900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Symptom Cause/Solution Playback sound skips. • The recorder is placed where it receives continuous vibration. , Put the recorder on a stable place. • A very short track may cause sound to skip. Sound has a lot of • Strong magnetism from a television or such device is interfering static. with operation. , Move the recorder away from the source of strong magnetism. Cannot find the track marks. • You pressed X after pressing . or >. , Press X before flipping the jog lever or pressing . or >. The rechargeable battery does not start charging. • The rechargeable battery has been inserted incorrectly or the AC power adaptor has been connected incorrectly. , Insert the battery correctly or connect the AC power adaptor correctly. The clock loses time or the display flashes. The recording date was not stamped onto the disc. • The built-in battery for the clock is weak. , Connect the AC power adaptor to DC IN 3V on the recorder and the wall outlet to charge the built-in battery. After charging, set the clock again (page 30). Note that the clock may gain or lose up to about 2 minutes per month under normal condition. • The clock is not set. , Set the clock (page 30). CD text • The cable connecting the devices is not an optical cable. information cannot , Use an optical cable to connect the devices. be recorded. • The connected portable CD player does not supports CD-TEXT. , Connect a portable CD player (D-E990, etc.) that supports CD- TEXT (page 31). • The inserted CD does not support CD-TEXT. , Insert a CD that supports CD-TEXT. VOL +/- or Digital Sound Preset does not function • The " AUDIO OUT" parameter is set to " LINE OUT" . , Set the " AUDIO OUT" parameter to " HeadPhone" (page 20). The disc cannot edit on other component. • The component does not support LP2 or LP4. , Edit on other component that support LP2 or LP4. Momentary noise is heard. • Due to the special digital audio compression technology used in LP4 mode, momentary noise may occur on very rare occasions with certain sound sources. , Record in normal stereo or LP2 mode. 63-GB
![](/manual_guide/products/sony-mzr900-operating-instructions-560560e/63.png)