Sony MZ-R900 Service Manual - Page 15

MZ-R900 • Description of Error Indication Codes Problem No error Servo system error TOC error Power supply system error Offset system error Indication code Meaning of code 00 No error Illegal access target 01 address was specified 02 High temperature 03 Focus error 04 Spindle error 11 TOC error 12 Data reading error 22 Low battery 31 Offset error 32 Focus error ABCD offset error Tracking error 33 Offset error 34 X1 tracking error Offset error Simple display --- Adrs Temp Fcus Spdl TOC Data LBat Ofst ABCD TE X1TE No error Description Attempt to access an abnormal address High temperature Disordered focus Abnormal rotation of disc Faulty TOC contents Data could not be read at SYNC Momentary interruption detected Offset error Focus error ABCD offset error Tracking error Offset error X1 tracking error Offset error • Description of Indication History History code number 1 N N1 N2 R_ Description The first error The last error One error before the last. Two errors before the last. Total recording time Reset the error display code After servicing, reset the error display code. • Setting method of Reset the Error Display Code 1. Setting the test mode (see page 12). 2. Press the [JOG LEVER $L% R] (up) key or [DISPLAY] key on the remote commander activates the self-diagnosis result display mode. 3. To reset the error display code, press the X key (2 times) when the code is displayed (except "R_****"). (All the data on the 1, N, N1, and N2 will be reset) 15