Sony PCV-J100 Reference Manual - Page 33
Configuring the System Board, Configuring Your System - ram
View all Sony PCV-J100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Configuring Your System 19 Configuring the System Board The system board contains a CMOS Clear configuration jumper, and two sets of reserved jumper blocks (do not change). The CMOS and Non-Volatile RAM (NVRAM) settings are only cleared if the checksum test returns false. Access to specific setup fields is controlled by a supervisor password or user password. The Clear CMOS mode removes the password that is stored in CMOS. No other parameters are cleared. ✍ The configuration jumpers should never need changing unless otherwise directed by a technical support or service technician. ! Before opening the system, save any open files, exit the Microsoft® Windows® operating system, turn off the power of the computer and all attached peripherals, and unplug the power cord. 1 Remove the side panel (see "Removing the Side Panel" on page 22). 2 Set the jumpers as directed by a service technician (also see "Configuration Jumper" on page 62). 123 Reserved (do not change) Reserved (do not change) CMOS CLR = default jumper 1-2 2-3 CMOS Clear Normal Clear OM04588.VSD 3 Reinstall the side panel (see "Replacing the Side Panel" on page 25).