Sony PCV-J100 Reference Manual - Page 44

Removing an Add-in, Replacing the Side Panel, Replace any add-in cards that were removed.

Page 44 highlights

30 VAIO® Reference Manual 8 If necessary, remove any add-in cards (see "Removing an Add-in Card" on page 27) to gain access to the battery. You may also need to disconnect some cables. ! Touch any exposed metal part of chassis to discharge static electricity in your body before handling an add-in card or other sensitive electronic component. 9 Use your finger or a small flathead screwdriver push in on the small tab inside the battery holder to pop out the battery. KY0072.VSD 10 Lift out the battery and dispose of it according to the instructions that came with the new battery. 11 Insert the new battery into the battery holder, with the plus (+) side up, and gently press down until the battery snaps into place. ✍ The Sony CR2032 battery is recommended. Using a type of battery other than a CR2032 may present a risk of fire or explosion. 12 Replace any add-in cards that were removed. 13 Reconnect any cables that were disconnected. 14 Replace the side panel (see "Replacing the Side Panel" on page 25). 15 Reconnect the power cord and turn on the computer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

VAIO
®
Reference Manual
30
8
If necessary, remove any add-in cards (see
Removing an Add-in
Card
on page 27) to gain access to the battery. You may also need to
disconnect some cables.
9
Use your finger or a small flathead screwdriver push in on the small
tab inside the battery holder to pop out the battery.
10
Lift out the battery and dispose of it according to the instructions that
came with the new battery.
11
Insert the new battery into the battery holder, with the plus (+) side
up, and gently press down until the battery snaps into place.
12
Replace any add-in cards that were removed.
13
Reconnect any cables that were disconnected.
14
Replace the side panel (see
Replacing the Side Panel
on page 25).
15
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
KY0072.VSD