Sony PCV-J100 Reference Manual - Page 56
overtighten the screws., Connect the second power connector to the new drive. - motherboard
View all Sony PCV-J100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
42 VAIO® Reference Manual 7 Slide the new drive into the drive holder and align the holes on each side of the drive holder. Align holes KY0083.VSD 8 Secure the drive to the drive holder using the two holes on each side of the drive holder (screws are provided with the new drive). Do not overtighten the screws. 9 Connect the second drive connector to the new drive (see next diagram). 10 Connect the second power connector to the new drive. Second power connector Second drive connector 11 Make sure the drive connector is connected securely to the motherboard. KY0085.VSD
VAIO
®
Reference Manual
42
7
Slide the new drive into the drive holder and align the holes on each
side of the drive holder.
8
Secure the drive to the drive holder using the two holes on each side
of the drive holder (screws are provided with the new drive). Do not
overtighten the screws.
9
Connect the second drive connector to the new drive (see next
diagram).
10
Connect the second power connector to the new drive.
11
Make sure the drive connector is connected securely to the
motherboard.
KY0083.VSD
Align
holes
KY0085.VSD
Second power connector
Second drive connector