Sony PCV-R545DS Online Help Center (VAIO User Manual) - Page 174
Now your Smart Connect software is ready to use. Note that when you use Smart Connect
View all Sony PCV-R545DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Your VAIO® computer includes a 4-pin i.LINK connector on the front of the system and a 6-pin i.LINK connector on the back of the system. A 6-pin i.LINK connector can supply power from the computer to the connected device if the device is equipped with a 6-pin connector. A 6-pin connector supplies 10V to 12V. The total power supplied by the 6-pin i.LINK connector cannot exceed 6 watts. A 4-pin i.LINK connector cannot supply power to a connected device. The following Sony i.LINK 400 Mbps cables are available and recommended for use with your computer: VMC-IL4415, VMC-IL4435, VMC-IL4615, VMC-IL4635, VMC-IL6615, and VMC-IL6635. Sony computer supplies, accessories, and peripherals can be purchased from your dealer or by contacting Sony at http://www.sony.com/accessories. To connect an i.LINK (IEEE-1394) device Use the symbol to locate the i.link connector. Plug the i.LINK cable into this connector. See the manual that came with your i.LINK (IEEE-1394)-equipped device for more information on setting it up and using it. Enabling Smart Connect Your computer comes with preinstalled Smart Connect software. To enable faster startup, your computer ships with this software disabled. To enable Smart Connect: 1. Click the Start button, select Settings, and click Control Panel. The Control Panel window appears. 2. Click the System icon. The System Properties window appears. Click the Device Manager tab. 3. Double-click Sony i.LINK(1394) Adapter. The Sony i.LINK(1394) Adapter window appears. Click the Enable Device button. 4. Click OK. The Sony i.LINK(1394) Adapter icon should no longer have an "X" on it. This means Smart Connect is now enabled. 5. Close all windows, and restart your computer in order for the new settings to take effect. Now your Smart Connect software is ready to use. Note that when you use Smart Connect to connect two VAIO computers, you must assign each computer a unique name by which it can be identified when the two computers are networked. See the Smart Connect online help for more information. Page 174