Sony PDWF800 User Manual (PDW-700 / PDW-F800 Operation Manual for Firmware Ver - Page 107
Recording proxy data, To record with the Live Logging function, enabled
View all Sony PDWF800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Chapter 4 Shooting Operating mode Live Live View Main functions as seen from this unit • Send clip metadata • Write edited clip metadata back to disc • Receive planning metadata • Receive clip lists • Same functions as above • Send proxy AV data Notes • The CBKZ-UPG01 Software Upgrade Key must be installed to use the Live Logging function. • In Live View mode, it is not possible to set time data by setting the F-RUN/SET/R-RUN switch to SET. To set time data, first switch from Live View mode to another operating mode. • Regardless of the setting of the F-RUN/SET/R-RUN switch, time data advances in F-RUN mode while the unit is operating in Live View mode. • In Live View mode, it is not possible to set the PRESET/REGEN/CLOCK switch to REGEN and record timecode that is continuous with timecode read from the disc. To record with the Live Logging function enabled On the REC FUNCTION page of the OPERATION menu, set LIVE LOGGING to one of the following. LIVE: Live mode VIEW: Live view mode Notes • "LIVE LOGGING" does not appear in the REC FUNCTION page of the OPERATION menu unless the CBKZ-UPG01 Software Upgrade Key is installed. • It is not possible to enable the Live Logging function while this unit is in the following states. - The proxy data recording function is enabled. - During Slow & Quick Motion shooting (PDW-F800 only) • It is not possible to set the Live Logging function to Live View mode while this unit is in the following states. - The Picture Cache function is enabled. - The Interval Rec function is enabled. - The Disc Exchange Cache function is enabled. - The Clip Continuous Rec function is enabled. • The Live Logging function is disabled automatically whenever you enable the proxy data recording function. Recording proxy data You can connect a USB flash drive to the USB connector and use it to save proxy metadata. (Here, "proxy metadata" refers to proxy AV data for the clips on the disc as well as to metadata.) 1) You can then connect this USB flash drive to a computer with the PDZ-1 Proxy Browsing Software installed and use the software to view the proxy AV data, to edit and enter metadata (titles, comments, essence marks, and so on), and to create clip lists. 1) When recording of proxy metadata finishes, the planning metadata that has been loaded into this unit (if any) is also copied to the USB flash drive. The data is saved in the following directories, which are created automatically when a USB flash drive is mounted. • Proxy AV data: \MSSONY\PRO\XDCAM\ MEMDISC\PROAVID\Sub • Metadata: \MSSONY\PRO\XDCAM\MEMDISC\ PROAVID\Clip • Planning metadata: \MSSONY\PRO\XDCAM\ MEMDISC\PROAVID\General\Sony\Planning Notes • USB flash drives must be formatted with the FAT32 file system. If a drive is formatted with any other file system, reformat it on this unit (see page 110). • Never remove a USB flash drive or disconnect the battery pack or power cord while it is being accessed (while this unit's ACCESS indicator is lit). Doing so can corrupt the data on the USB flash drive and make it unusable. To enable proxy data recording and copying to USB flash drives Before starting, set ETHERNET/USB in the POWER SAVE page of the OPERATION menu to "ENABL". 1 In the OPERATION menu, display the MEMORY REC page. See "Basic menu operations" (page 205) for more information about menu operations. 2 Select MEMORY REC, and turn the MENU knob until ENABL appears. Advanced Operations for Shooting 107