Sony PDWU1 User Manual (PDW-U1 Professional Disc Drive Unit Operation Manual F - Page 43

Write-Protecting, Discs, Loading and, Unloading Discs

Page 43 highlights

Chapter 3 Preparations • Deliberately opening the shutter may cause damage. • Do not disassemble the cartridge. • The supplied adhesive labels are recommended for indexing discs. Apply the label in the correct position. Storage • Do not store discs where they may be subjected to direct sunlight, or in other places where the temperature or humidity is high. • Do not leave cartridges where dust may be able to gain ingress. • Store cartridges in their cases. Care of the discs • Remove dust and dirt on the outside of a cartridge using a soft dry cloth. • If condensation forms, allow ample time to dry before use. 3-4-3 Write-Protecting Discs To protect the content recorded on the disc from accidental erasure, move the writeprotect tab on the lower surface of the disc in the direction of the arrow, as shown in the following figure. Lower surface of the disc Write Inhibit tab SAVE Write Inhibit tab settings SAVE Recording enabled Slide in the direction of the arrow SAVE Recording disabled 3-4-4 Loading and Unloading Discs To load and unload a disc, press 1 (power) button to turn the unit on and light the indicator, and follow the procedures indicated in the next illustration. 43 3-4 Handling Discs

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

43
3-4 Handling Discs
Chapter 3
Preparations
Deliberately opening the shutter may
cause damage.
Do not disassemble the cartridge.
The supplied adhesive labels are
recommended for indexing discs. Apply
the label in the correct position.
Storage
Do not store discs where they may be
subjected to direct sunlight, or in other
places where the temperature or humidity
is high.
Do not leave cartridges where dust may
be able to gain ingress.
Store cartridges in their cases.
Care of the discs
Remove dust and dirt on the outside of a
cartridge using a soft dry cloth.
If condensation forms, allow ample time
to dry before use.
3-4-3
Write-Protecting
Discs
To protect the content recorded on the disc
from accidental erasure, move the write-
protect tab on the lower surface of the disc
in the direction of the arrow, as shown in the
following figure.
3-4-4
Loading and
Unloading Discs
To load and unload a disc, press
1
(power)
button to turn the unit on and light the
indicator, and follow the procedures
indicated in the next illustration.
SAVE
SAVE
SAVE
Lower surface
of the disc
Write Inhibit tab
Slide in the direction
of the arrow
Write Inhibit
tab settings
Recording
enabled
Recording
disabled