Sony PVM-2030/BS Operating Instructions - Page 5
Sony PVM-2030/BS Manual
View all Sony PVM-2030/BS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ID MUTING indicator Illuminates while the sound is muted. • Muting is controlled only by a remote commander. 10 STAND BY indicator Illuminates when the POWER switch is turned off. 11 POWER switch Press this switch to turn the monitor on. Press this switch again to turn it off. • When the monitor is turned on, the settings of the monitor are the same as when it was last turned off. • For a few seconds after turning on the monitor the color of picture may vary because the white balance is adjusted at this time. This is not a problem. I] REMOTE control detector The beam from the Remote Commander is received here. 13 CONTROL key Press this key to illuminate the keys and indicators on the front panel. Press this key again to extinguish them. VOLUME control keys Press the + key to raise the volume or the - key to lower it. El PICTURE control keys Press the + key to make the contrast, color intensity and brightness stronger or the - key to make them weaker. nEl LINE A indicator LINE B indicator EJ VTR indicator 19 CMPTR (computer) indicator When the input source is selected, each indicator • Blinks if the indicators and keys excepting input source indicators illuminate. • Illuminates if they are extinguished. Note on the superimposing function The PVM-2030/2530 can superimpose the CMPTR input source onto the other input source. For this function once the CMPTR input source has been selected, both the indicator of the CMPTR input source and the indicator of the input source selected just before the CMPTR will blink or illuminate. Key illumination For the keys ['through Hand • While each key is pressed, it blinks, indicating that adjustment is going on. • During adjustment, if the adjustment value reaches the limit, the blinking speed becomes slower.