Sony PXW-FX9 Operating Instructions - Page 102
Network Menu
View all Sony PXW-FX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
102 6. Menu Display and Settings Network Menu This section describes the function and settings of each menu item. Factory default settings are shown in bold (for example, 18dB). Network >Access Authentication Sets settings related to authentication. Item Sub-item setting User Name Password Description Sets the user name for access authentication. Sets the password for access authentication. Network >Wireless LAN Sets settings related to wireless LAN connections. Item Sub-item setting Setting Access Point Mode / Station Mode / Off WPS Execute / Cancel NFC Execute / Cancel MAC Address Description Selects the operation mode of the wireless LAN connection. Establishes a connection using WPS (Wi-Fi Protected Setup). Execute: Execute function. Establishes a connection using NFC (Near Field Communication). Execute: Execute function. Displays the MAC address of the wireless LAN interface of the camcorder. Network >AP Mode Settings Sets settings related to access point mode connections. Item Sub-item setting Description Channel Auto(5GHz) / Auto / CH1 / CH2 / CH3 / CH4 / CH5 / CH6 / CH7 / CH8 / CH9 / CH10 / CH11 Sets the wireless LAN channel. Auto(5GHz) is available on the PXW-FX9V only. Camera SSID & Password Displays the SSID and password of the camcorder. Regenerate Execute / Cancel Password Creates a new password. Execute: Execute function. IP Address Displays the IP address of the camcorder in access point mode. Subnet Mask Displays the subnet mask of the camcorder in access point mode. Network >ST Mode Settings Sets settings related to station mode connections. Item Sub-item setting Camera Remote Control Enable / Disable Connected Network SSID Security Password DHCP IP Address Subnet Mask Gateway DNS Auto Primary DNS Server Secondary DNS Server Description Sets whether to enable remote control from a device connected to the camcorder by wireless LAN in station mode. Displays the connected wireless LAN network (access point). Displays the SSID for the access point to connect. Displays the type of security for the access point to connect. Displays the password for the access point to connect. When Security is set to WEP or WPA: ******* When Security is set to None: (blank) Displays whether DHCP is on/off. Displays the IP address of the camcorder when DHCP is set to Off. Displays the subnet mask of the camcorder when DHCP is set to Off. Displays the default gateway of the camcorder when DHCP is set to Off. Displays whether DNS acquisition is on/ off. Displays the primary DNS server of the camcorder when DNS Auto is set to Off. Displays the secondary DNS server of the camcorder when DNS Auto is set to Off.