Sony PXW-FX9 Operating Instructions - Page 67
Setup Menu Operations
View all Sony PXW-FX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
67 6. Menu Display and Settings Setup Menu Operations Press the MENU button to display the setup menu in the viewfinder to specify various items for shooting, recording, and playback (menu can also be displayed on an external monitor). Menu Controls MENU button (page 7) Turns menu mode for setup menu operations on/off. SET button (page 7) Press the arrows buttons to move the cursor up/down/left/right to select menu items or settings. Press the SET button to apply the selected item. [Tip] You can also use the multi selector (page 9) in the same way. Multi-function dial (page 4) Turn the multi-function dial to move the cursor up/down to select menu items or settings. Press the multi-function dial to apply the selected item. CANCEL/BACK button (page 7) Press to return to the previous menu. An uncompleted change is canceled. [Notes] ˎˎ The setup menu cannot be operated when in focus magnifier mode (page 34). ˎˎ Some items cannot be selected, depending on the state when the menu was displayed. Setting Menu Items Entering a Character String Press the arrow buttons or turn the multifunction dial to move the cursor to the menu item to set, then press the SET button or multifunction dial to select the item. ˎˎThe menu item selection area displays up to eight lines. If the available options for an item cannot be displayed at the same time, scroll the display by moving the cursor up/ down. ˎˎFor sub-items with a large settings range (for example, -99 to +99), the settings area is not displayed. The current setting is highlighted to indicate that the value can be changed. ˎˎSelecting [Execute] for a function will execute the corresponding function. ˎˎSelecting an item that requires confirmation before execution will temporarily hide the menu and display a confirmation message. Check the message, and then select whether to execute or cancel the function. When you select an item, such as a file name, which requires character entry, the character entry screen appears. 1 2 3 1 Press the arrow buttons or turn the multi- function dial to select a character type, then apply the setting. ABC: Uppercase alphabetic characters abc: Lowercase alphabetic characters 123: Numeric characters !#$: Special characters 2 Select a character from the selected character type, then apply the setting. The cursor moves to the next field. Space: Enters a space character at the cursor position. /: Moves the position of the cursor. BS: Deletes the character on the left of the cursor (backspace). 3 When finished, select [Done] and apply the setting. The character string is confirmed and the character entry screen disappears. Locking and Unlocking the Menu You can lock the setup menu so that only the User menu is displayed. Locking the menu 1 Press and hold the multi-function dial and press the MENU button. 2 Select Menu Settings >User Menu with Lock in the Technical menu. [Note] When only the MENU button is pressed to display the normal setup menu, User Menu Only is displayed under Menu Settings in the Technical menu. Press and hold the multi-function dial and press the MENU button to display User Menu with Lock. 3 Set to On, and press the SET button or multi-function dial. The viewfinder screen display switches to the passcode number input screen. 4 Enter an arbitrary number. Enter a 4-digit number in the range 0000 to 9999. The default value is 0000. Enter a number and press the SET button or multi-function dial to move the cursor to the next digit. When all digits have been entered, move the cursor to SET. 5 Press the SET button or multi-function dial. The entry is applied. A confirmation message appears, and the screen switches to the User menu display.