Sony PXW-FX9 Operating Instructions - Page 26
Inserting XQD Memory Cards, Formatting Initializing XQD, Memory Cards, If formatting fails
View all Sony PXW-FX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 2. Preparation: Using XQD Memory Cards Recording format XAVC Long 422 3840×2160 1920×1080 Normal mode or S&Q (60P or lower) Normal mode or S&Q (60P or lower) S&Q (above 60P) 59.94P/ 50P/ 29.97P/ 25P/ 23.98P 59.94P/ 50P/ 59.94i/ 50i/ 29.97P/ 25P/ 23.98P 59.94P/ 50P 29.97P MPEG2 HD 422 1920×1080 Normal mode 25P/ 23.98P 59.94i/ 50i/ 29.97P/ 25P/ 23.98P G-series S-series (QD-S64E/ S32E) Yes Yes Yes Yes Yes Yes N-series M-series Yes H-series S-series (QD-S64/ S32) No Yes Yes Yes No 50 Mbps: No No 35 Mbps: Yes No No Yes Yes Inserting XQD Memory Cards 1 Open the media cover of the card slot section. 2 Insert an XQD memory card with the XQD label facing to the left. The access indicator (page 8) is lit red, then changes to green if the card is usable. 3 Close the media cover. [Notes] ˎˎ The memory card, memory card slot, and image data on the memory card may be damaged if the card is forced into the slot in the incorrect orientation. ˎˎ When recording to media inserted in both XQD card slots A and B, insert media in both slots that is recommended for operation with the format of the recording. Ejecting XQD Memory Cards Open the media cover of the card slot section, and lightly press the XQD memory card in to eject the card. [Notes] ˎˎ If the camcorder is turned off or the memory card is removed while the memory card is being accessed, the integrity of data on the card cannot be guaranteed. All data recorded on the card may be discarded. Always make sure the access indicator is green or off before turning off the camcorder or removing the memory card. ˎˎ When removing an XQD memory card immediately after recording is finished, the XQD memory card may be hot, but this does not indicate a problem. Formatting (Initializing) XQD Memory Cards If an unformatted XQD memory card or an XQD memory card that was formatted in a different specification is inserted, the message "Media Needs to be Formatted" is displayed in the viewfinder. Format the card using the following procedure. 1 Select Format Media (page 91) in the TC/Media menu. 2 Select Media(A) (slot A) or Media(B) (slot B), then select Execute. A confirmation message appears. 3 Select Execute. A message is displayed while formatting is in progress, and the access indicator is lit red. When formatting is completed, a completion message is displayed. Press the SET button or multi-function dial to dismiss the message. [Note] Formatting a memory card erases all data, including recorded video data and setup files. If formatting fails Memory cards not supported by the camcorder cannot be formatted. A warning message is displayed. Follow the instructions to replace the card with a supported XQD memory card.