Sony PXW-FX9 Operating Instructions - Page 21
Attaching the Grip Remote Control, Attaching an A-mount lens, Removing a lens
View all Sony PXW-FX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
21 2. Preparation: Attaching Devices 3 Align the lens mount mark (white) with the camcorder, carefully insert the lens, and slowly turn the lens lock ring counterclockwise to secure the lens. Mount marks (white) [Notes] ˎˎ If the lens lock ring stopper does not return to the lock position when the lens is attached, move the stopper to the lock position manually. ˎˎ When attaching a lens, align the mount mark (white) on the lens lock ring with the mount mark (white) on the camcorder. Attaching an A-mount lens To use an A-mount lens, attach a lens mount adaptor (option) and then attach the A-mount lens. [Note] When using an A-mount lens, the iris is set manually and focus is set to MF. Removing a lens Remove a lens using the following procedure. 1 Release the lens lock ring stopper, and turn the lens lock ring clockwise while firmly supporting the lens. 2 Pull the lens out in the forward direction. [Notes] ˎˎ When removing a lens, align the mount mark on the lens lock ring with the mount mark on the camcorder. ˎˎ Grasp the lens securely in your hand to prevent the lens from falling. ˎˎ If another lens will not be attached immediately, always attach the body cap. Iris adjustments for lenses with Auto Iris switch ˎˎWhen the lens Auto Iris is set to AUTO, the iris is adjusted automatically and can also be adjusted manually from the camcorder. ˎˎWhen the lens Auto Iris is set to MANUAL, the iris can only be adjusted using the lens ring. Iris operation from the camcorder has no effect. Attaching the Grip Remote Control [Note] Attach/remove the grip remote control while the camcorder is turned off. 1 Attach the arm to the grip attachment, and tighten the screw. Focus adjustments for lenses with focus switch ˎˎWhen the lens focus switch is set to AF/MF or AF, the focus is adjusted automatically and can also be adjusted manually from a remote control unit. ˎˎWhen the lens focus switch is set to MF, the focus is adjusted using the lens ring and can also be adjusted manually from a remote control unit. [Note] When using an A-mount lens, manual adjustment from a remote control unit may not be available. ˎˎWhen the lens focus switch is set to Full MF, the focus can only be adjusted using the lens ring. Focus operation from the camcorder has no effect. Attaching to a tripod Use the tripod screw holes on the camcorder when attaching to a tripod. Using the tripod mount on the lens may cause damage. 2 Connect the grip remote control cable to the USB/multi connector on the camcorder, and secure the cable in the cable clamper. Clamper [Notes] ˎˎ When attaching the grip remote control cable, secure the cable in the cable clamper to prevent damaging it. ˎˎ Check that the arm is securely attached to the camcorder. The camcorder may fall while shooting if the screw is loose. ˎˎ Do not support the weight of the camcorder by holding just the grip remote control. ˎˎ After connecting the grip remote control cable, always lock the cable in the clamper. Pulling on the cable with force during use may damage the connector. ˎˎ If the grip cable gets in the way, secure it using the cable clamper in the center of the arm.