Sony RDR-HX730 Operating Instructions - Page 85
Audio Settings (Audio), Press SYSTEM MENU while
View all Sony RDR-HX730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Settings and Adjustments Audio Settings (Audio) The "Audio" setup allows you to adjust the sound according to the playback and connection conditions. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select "SETUP," and press ENTER. 3 Select "Audio," and press ENTER. The "Audio" setup appears with the following options. The default settings are underlined. Auto Stereo This function is effective only when "Tuner Audio" is set to "Main." On Receives stereo programs. Normally select this. Off Select this to reduce noise. The sound changes to monaural. Tuner Audio Selects the sound to be recorded. Main Records only the main sound. SAP Records only the SAP (Second Audio Program) sound. b Note If no SAP sound is received, the main sound is recorded regardless of the setting. Audio ATT (attenuation) If the playback sound is distorted, set this item to "On." The recorder reduces the audio output level. This function affects the output of the following jacks: - LINE OUT R-AUDIO-L jacks On Select this when the playback sound from the speakers is distorted. Off Normally select this position. Audio Connection The following setup items switch the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack. For connection details, see "Step 3: Connecting the Audio Cords" on page 18. Select "Dolby Digital," "DTS," and "48kHz/ 96kHz PCM" after setting "Digital Out" to "On." If you connect a component that does not accept the selected audio signal, a loud noise (or no sound) will come out from the speakers, and may affect your ears or cause speaker damage. 1 Select "Audio Connection" in "Audio," and press ENTER. 2 Select "Digital Out," and press ENTER. On Normally select this position. Off The influence of the digital circuit upon the analog circuit is minimal. 3 Select "On," and press ENTER. 4 Set the digital output signal. ,continued 85