Sony RM-AX4000A Instruction Manual - Page 49
To clear the learned signal from a key or button, Learning up to 4 signals to one key, hear a beep.
UPC - 027242701205
View all Sony RM-AX4000A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 Press the key or button on the Remote Commander you want to "teach" the preset code to. " LEARN " flashes and only the pressed key remains on the LCD display. SU LEARN NG TV /1 Learning up to 4 signals to one key This is useful when the Remote Commander is not working properly, even when the signal is learned for the Remote Commander using the Learning function. You can also use this function to switch the input mode such as TV, etc., or to switch between DVD player and DVD recorder operation with one key. To re-teach already learned keys or buttons, press the key or button while pressing the LIGHT button. LIGHT INPUT When you have programmed the buttons on the Remote Commander The names of buttons not on the LCD display (VOLUME +/-, CHANNEL +/-, MUTING, RECALL, MENU, EPG, TOOLS, EXIT, F, f, g, G and OK ) appear on the right Label keys. To clear the learned signal from a key or button While pressing the SYNC-UP button, press the learned key or button you want to clear. SYNC-UP " LEARN " flashes and the only the pressed key remains on the LCD display. You can teach a maximum of 4 functions to one key or button. 6 Press and hold the button on the other remote control until you hear a beep. (If you release the button before you hear a beep, the signal may not be learned correctly.) Other remote control's button Setting by On-Remote Setup The cleared key flashes together with other keys that are available for learning. " LEARN " stops flashing and stays lit. When the command has been learned successfully, the learned keys stay lit and the other keys available for learning flash alternately. Notes • If "NG" flashes on the LCD display with 5 beep sounds, learning did not succeed. Try again steps 5 and 6. • If you touch a wrong key by mistake, while pressing the SYNC-UP button, press the incorrect key again. Continued 49