Sony SA-VA1 Operating Instructions - Page 15

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: For front full range/center woofer speakers: with 4 ohm loads, both channels driven, from 40 Hz -20 kHz; rated 18 watts per channel minimum RMS power, with no more than 0.8 0/0 total harmonic distortion from 250 milliwatts to rated output. Other specifications Amplifier section Continuous RMS power output tota1100 W Center tweeter: 17 W (4 ohms at 10 lcHz, 10% THD) Front full range/center woofer :22 W + 22 W (4 ohms at 1 kHz, 10% THD) Super woofer: 22 W (4 ohms at 40 Hz, 10% THD) Rear 17 W (4 ohms at 1 kHz, 10% THD) Input sensitivity/impedance INPUT 1/2: 450 mV, 50 Id/ Output INPUT 1/2: 450 mV, 1 kil Center: 650 mV, 2 kit Rear: Accept only supplied rear speakers SS-SR11 R-ch: Accept only SA-VA1 R-ch speaker with supplied front L/R speaker connecting cord Tone control Front/center Super woofer Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz +10 dB at 30 Hz in MOVIE mode Speaker section Type Front speaker system Bassreflex type DBR super woofer SAW type Rear speaker Bassreflex type Speaker unit Front speaker system Center tweeter: 5 cm cone type (x2) Front full range/center woofer: 10 cm cone type (x2) Super woofer 13 cm cone type (x2) Rear speaker 8 cm cone type (x2) General Power requirement 120 V AC, 60 Hz Power consumption 60 W Dimensions Approx. 180 x 1040 x 305 mm (w/h/d) (7'/8 x 41 x 12 inches) Approx. 240 x 1040 x 370 mm (w/h/d, including speaker base) (9 '/2 x 41 x 14 5/ 8 inches) Mass Front (L): 16 kg (35 lb 3 oz) Front (R): 13 kg (28 lb 9 oz) Rear: 800 g/pc (1 lb 12 oz) Supplied accessories Front L/R speaker connecting cord, 3.5 m (1) Rear speaker connecting cord, 10 m (2) Audio connecting cord, 1.5 m (1) Remote commander RM-VAI (1) Sony batteries SUM-3 (NS) (2) Design and specifications are subject to change without notice.