Sony SDM-HS75 Operating Instructions - Page 12
Adjusting the contrast (CONTRAST), Adjusting the black level of an image (BRIGHTNESS) - manual
View all Sony SDM-HS75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Adjusting the contrast (CONTRAST) Adjust the picture contrast. Note The contrast cannot be adjusted when the MIDDLE, or LOW (page 10). mode is set to HIGH, 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select 6 (CONTRAST) and press the OK button. The CONTRAST menu appears on the screen. 3 Press the m/M buttons to adjust the contrast and press the OK button. Adjusting the black level of an image (BRIGHTNESS) Adjust the picture brightness (black level). Note The brightness cannot be adjusted when the MIDDLE, or LOW (page 10). mode is set to HIGH, 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select 8 (BRIGHTNESS) and press the OK button. The BRIGHTNESS menu appears on the screen. 3 Press the m/M buttons to adjust the brightness and press the OK button. Adjusting the picture's sharpness and centering (SCREEN) x Automatic picture quality adjustment function When the monitor receives an input signal, it automatically adjusts the picture's position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 16). Note While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate. If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.) If you still need to make further adjustments to the picture quality You can manually adjust the picture's sharpness (phase/pitch) and position (horizontal/vertical position). These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer. x Make further automatic adjustments to the picture quality for the current input signal (AUTO) 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 3 Press the m/M buttons to select AUTO and press the OK button. Make the appropriate adjustments of the screen's phase, pitch and horizontal/vertical position for the current input signal and store them. 4 Press the m/M buttons to select OK button. Return to the menu screen. and press the x Adjust the picture's sharpness manually (PHASE/PITCH) You can adjust the picture's sharpness as follows. 1 Set the resolution to 1280 × 1024 on the computer. 2 Load the CD-ROM. 3 Start the CD-ROM, select the region and model, and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility.exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. 4 Press the MENU button. The main menu appears on the screen. 5 Press the m/M buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 6 Press the m/M buttons to select PHASE and press the OK button. The PHASE menu appears on the screen. 7 Press the m/M buttons until the horizontal stripes are at a minimum. 12