Sony SDM-HS75 Operating Instructions - Page 17
Troubleshooting, On-screen messages - problems
View all Sony SDM-HS75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting Before contacting technical support, refer to this section. On-screen messages If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see "Trouble symptoms and remedies" on page 18. If OUT OF RANGE appears on the screen This indicates that the input signal is not supported by the monitor's specifications. Check the following items. I NFORMA T I ON OUT OF RANGE x x x . x kHz / x x xHz If "xxx.x kHz/xxx Hz" is displayed This indicates that either the horizontal or vertical frequency is not supported by the monitor's specifications. The figures indicate the horizontal and vertical frequencies of the current input signal. If "RESOLUTION > 1280 × 1024" is displayed This indicates that the resolution is not supported by the monitor's specifications (1280 × 1024 or less). If NO INPUT SIGNAL appears on the screen This indicates that no signal is being input. I NFORMA T I ON NO I NPUT S I GNA L GO TO POWER SAVE GO TO POWER SAVE The monitor will enter the power saving mode after about 5 seconds from the time the message is displayed. If CABLE DISCONNECTED appears on the screen This indicates that the video signal cable has been disconnected. I NFORMA T I ON CAB L E D I SCONNECT ED GB 17