Sony SDM-N50PS Operating Instructions (primary manual) - Page 7

Media engine SYSTEM CONNECTER (TO DISPLAY) INPUT 1 AUDIO IN INPUT 2 qs AUDIO IN jack (page 10) This jack inputs audio signals when connecting to the audio output jack of the computer or other audio equipment. qd SYSTEM CONNECTOR (TO DISPLAY) (page 8) This connector outputs signals to the display when the display and the media engine are connected with a system connecting cable. qf HD15 (RGB) input 1 connector (INPUT1) (page 8) This connector inputs RGB video signals (0.700 Vp-p, positive) and SYNC signals. 54321 10 9 8 7 6 15 14 13 12 11 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Red Green (Sync on Green) Blue ID (Ground) DDC Ground* Red Ground Green Ground Blue Ground DDC + 5V* Ground ID (Ground) Bi-Directional Data (SDA)* H. Sync V. Sync Data Clock (SCL)* * DDC (Display Data Channel) is a standard of VESA. qg HD15 (RGB) input 2 connector (INPUT2) (page 8) This connector inputs RGB video signals (0.700 Vp-p, positive) and SYNC signals. The pin assignment is the same as qf. qh AC IN connector (page 9) This connector provides AC power to the monitor. qj AC power switch (page 9) This switch turns the media engine on and off. When the AC power switch is turned on or off, the display automatically turns on or off. qk AC power indicator (page 17) This indicator lights up in green when the media engine is turned on. The indicator lights up in red when the display is turned off with the media engine on. The indicator lights up in orange when the monitor is in the power saving mode. ql Media engine stand This stand is used to install the media engine vertically. Caution Be sure to install the media engine vertically shown as left. Installing the media engine lying flat may block ventilation, and may cause a malfunction. GB 7