Sony SLT-A99V α Handbook - Page 136
To recall the custom white balance setting, Select a register number with, on the multi-selector, then
View all Sony SLT-A99V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Adjusting the color tones (White balance) 3 Select a register number with b/B on the multi-selector, then press the center of the multi-selector. The monitor returns to the recording information display with the memorized custom white balance setting retained. • The custom white balance setting registered in this operation is effective until a new setting is registered. Note • The message "Custom WB error" indicates that the value is beyond the expected range, when the flash is used on a subject in close proximity or a subject with a bright color is in the frame. If you register this value, the indicator turns yellow on the recording information display. You can shoot at this point, but it is recommended that you set the white balance again to get a more accurate white balance value. To recall the custom white balance setting WB button t Select the desired register number • Press B on the multi-selector to display the fine adjustment screen and compensate the color to your preference. Note • If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash light taken into account. Take pictures with the flash in later shootings. 136