Sony SLT-A99V α Handbook - Page 219

Troubleshooting The color of the image is strange. • When you print the images recorded in Adobe RGB mode using sRGB printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the images are printed at a lower intensity level (page 151). Images are printed with both edges cut off. • Depending on your printer, the left, right, top, and bottom edges of the image may be cut off. Especially when you print an image shot with the aspect ratio set to [16:9], the lateral end of the image may be cut off. • When printing images on your printer, cancel the trimming or borderless settings. Consult the printer manufacturer as to whether the printer provides these functions or not. • When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges. Cannot print images with the date. • Using "PlayMemories Home," you can print images with date (page 199). • When you print images at a shop, images can be printed with the date if you ask them to do so. Others The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about 1 hour before using it (page 227). The message "Set Area/Date/Time." appears when you turn on the camera. • The camera has been left unused for sometime with a low battery or no battery pack. Charge the battery pack and set the date again (pages 58, 227). If the date setting is lost every time the battery pack is charged, consult your Sony dealer or local authorized Sony service facility. The number of recordable images does not decrease or decreases 2 at a time. • This is because the compression rate and the image size after compression change depending on the image when you shoot a JPEG image (page 139). 219 Troubleshooting/Others