Sony SLV-N51 Operating Instructions - Page 32

To watch another TV program while recording, To save a recording, Notes, Safety tab - vcr remotes

Get Sony SLV-N51 - Video Cassette Recorder PDF manuals and user guides View all Sony SLV-N51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

To watch another TV program while recording 1 Press TV/VIDEO to turn off the VCR indicator in the display window. 2 If the TV is connected to the VCR's LINE OUT jacks, set the TV to the TV's antenna input; if not, skip this step. 3 Select another channel on the TV. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape. Safety tab Tips • To select a channel, you can use the number buttons on the remote commander. Enter the channel number, then press ENTER. • You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT SELECT button. • The display appears on the TV screen indicating information about the tape, but the information won't be recorded on the tape. • If you don't want to watch TV while recording, you can turn off the TV. When using a cable box, make sure to leave it on. Notes • The remaining tape length may not be indicated accurately for short tapes such as T-20 or T- 30, or tapes recorded in the LP mode. • The display does not appear during still (pause) mode or slow-motion playback. • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. 32 Recording TV programs

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
32
Recording TV programs
To watch another TV program while recording
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated.
To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
•
To select a channel, you can use the number buttons on the remote commander.
Enter the
channel number, then press ENTER.
•
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
•
The display appears on the TV screen indicating information about the tape, but the
information won
’
t be recorded on the tape.
•
If you don
’
t want to watch TV while recording, you can turn off the TV.
When using a cable
box, make sure to leave it on.
Notes
•
The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-
30, or tapes recorded in the LP mode.
•
The display does not appear during still (pause) mode or slow-motion playback.
•
It may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
1
Press TV/VIDEO to turn off the VCR indicator in the display window.
2
If the TV is connected to the VCR
’
s LINE OUT jacks, set the TV to the TV
’
s
antenna input; if not, skip this step.
3
Select another channel on the TV.
Safety tab