Sony SLV-N51 Operating Instructions - Page 9

Getting Started Step 3 : Hookups Selecting the best hookup option There are many ways in which your VCR can be hooked up. To hook up your VCR so that it works best for you, first scan through the table below. Then use the accompanying diagrams and procedures on the following pages to set up your VCR. If your TV has audio/video inputs, refer to pages 10 and 11 for audio/video (A/V) hookup. Then follow one of the hookups below. If your TV doesn't have A/V inputs, do directly to one of the hookups below. If you have Use Antenna only, no cable TV Hookup 1 (Plug and Play) No cable box or cable box with only a few Hookup 2 (Plug and Play) scrambled channels Cable box with many scrambled channels Hookup 3 Refer to Pages 12 and 13 Pages 14 and 15 Page 16 After you've completed the connections, follow the instructions for setup. After you've completed the setup, you're ready to use your VCR. Procedures differ depending on the hookup you used. For an overview, refer to "Quick reference to using the VCR" on the back cover. Before you get started • Turn off the power to all equipment. • Do not connect the AC power cords until all of the connections are completed. If you connect the AC power cord before the connections are completed, you may not be able to use the Plug and Play function. • Be sure you make connections firmly. Loose connections may cause picture distortion. • If your TV doesn't match any of the examples provided, see your nearest Sony dealer or qualified technician. Hookups 9