Sony SNC-RZ50N User Guide - Page 39
Picture Tab, Audio codec, Audio upload, Reset camera menu, OK/Cancel, White balance, Exposure mode
UPC - 027242240377
View all Sony SNC-RZ50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Administrating the Camera Audio codec Select the bit rate when you send the audio from the m microphone input connector. G.711 (64kbps), G.726 (40kbps), G.726 (32kbps), G.726 (24kbps) or G.726 (16kbps) can be selected. Note If the bit rate is set to other than G.711(64kbps), no audio is output when you use the Java applet viewer. Audio upload Using the SNC audio upload tool stored in the supplied CD-ROM, you can output the audio that is input to the computer's audio input terminal from the speaker connected to the line output jack of the camera. Select Enable to output the audio from the speaker. Reset camera menu Click Reset, and the message "Camera menu setting is reset to default. Are you sure?" is displayed. To reset to default, click OK. OK/Cancel See "Buttons common to every menu" on page 31. Picture Tab You can set the color condition, exposure, etc. of the camera. White balance Select the white balance mode. Auto: Automatically adjusts the color to be closest to the image you are viewing. (approximately 3000 K to 7500 K) Indoor: Adjusts the white balance for shooting indoors under an incandescent lamp. (about 3200 K) Outdoor: Adjusts the white balance for shooting outdoors. (about 5800 K) One push WB: The One push trigger button becomes active. Click the button to adjust the white balance instantly. ATW: Makes the subject lighter and automatically adjusts to re-create the original color. (approximately 2000 K to 10000 K) Manual: When this option is selected, R gain and B gain become active. Selectable gain values are from 0 to 255. Exposure mode Select the exposure mode of the camera. The setting items required for the selected mode become active. Full auto: The camera performs the gain adjustment and iris adjustment automatically. In this case, the shutter speed is fixed. (1/60 sec. for NTSC or 1/50 sec. for PAL). When this option is selected, Slow shutter and Backlight compensation become active. Shutter priority: The camera performs the gain adjustment and iris adjustment automatically and you can select the shutter speed. When this option is selected, Shutter speed becomes active. Iris priority: The camera performs the gain adjustment and shutter speed adjustment automatically, and you can select the iris. When this option is selected, Iris becomes active. Manual: You can set the exposure manually. When this option is selected, Shutter speed, Iris and Gain become active. Set the following items as required, according to the selected exposure mode. Backlight compensation You can set On or Off for backlight compensation. When you select On, the backlight compensation function starts to work. Exposure compensation The exposure compensation function adjusts the brightness of the image by compensating the exposure. When you select On, you can select the exposure compensation values. Selectable values are as follows: 39 Setting the Camera Image and Audio - Camera Menu