Sony SPP-A968 Operating Instructions - Page 13
Entering your area code, Step 4
![]() |
View all Sony SPP-A968 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step 4 Entering your area code When you use this phone for the first time, or move to an area that has a different area code, you must enter your area code. This is necessary because the phone must distinguish local or long distance calls to properly dial calls from the Caller ID list. Turn Press 1 Press (VOL/PGM). 2 Turn Jog Dial up to make "AREA" flash. DIRECTORY AREA Getting Started 3 Press Jog Dial. "ENTER AREA CODE" appears on the display. 4 Enter three digits of your area code using the dialing keys. 5 Press (VOL/PGM). You hear a long confirmation beep. Notes • If an area code is already entered, it appears on the display in step 3. To enter a different area code, see "To change the area code" below. • Do not allow more than 20 seconds to elapse between each step of the procedure. Tips • You may press Jog Dial instead of (VOL/PGM) in step 5. • To check the current area code, perform steps 1 to 3 above. The area code appears on the display for 20 seconds. To change the area code 1 Perform steps 1 to 3 above. The current area code appears on the display. 2 Turn Jog Dial down to erase the current area code. 3 Enter a new area code using the dialing keys. 4 Press (VOL/PGM). You hear a long confirmation beep. Getting Started 13US
![](/manual_guide/products/sony-sppa968-operating-instructions-0335807/13.png)