Sony STR-AV720 Operating Instructions - Page 14

Radio Reception Tuning in a Station Directly - Direct Tuning POWER ON 4 3 o 1 as S DEG a) 0 12 TUNER 2 Select FM or AM. 3 TUNING DIRECT To correct the entered frequency Repeat Steps 3 to 4. For entering AM frequencies, you need not enter the last "0". However, if you have changed the AM tuning interval to 9 kHz, enter all the digits. If you enter a frequency not covered by the tuning interval The entered value is automatically rounded up or down to the closest value covered by the tuning interval. Tuning intervals for direct tuning are the followings: FM: 50 kHz interval AM: 10 kHz interval (changeable to the 9 kHz interval) When the entered number is not in the receivable frequency range The entered digits (up to 5 digits for FM or up to 3 digits for AM) blink in the frequency display area, and reception does not take place. If this occurs, press TUNING DIRECT again, and enter the correct frequency (the frequency range of the receiver is 87.50 to 108.0 MHz for FM, and 530 to 1710 kHz for AM). When an FM stereo program is noisy When the unit receives an FM stereo program, the STEREO indicator goes on in the display window, If the stereo program is noisy, press FM MODE to change the mode over the MONO. This eliminates the stereo effect, but the noise will be greatly reduced. To return to the stereo mode, press FM MODE again. 4 Enter the frequency. The entered frequency is displayed. Example 1: FM 102.50 MHz Example 2: AM 1350 kHz 10 2 50 1 3 5 1L) 2.5 EM„, 14 4 4---1 I 3 5 k,„