Home » Sony Manuals » Audio Components » Sony STR-DA5600ES » Manual Viewer

Sony STR-DA5600ES Operating Instructions (Large File - 18.8 MB) - Page 20

Getting Started, Checking the connection appropriate for your components - test

Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Getting Started Checking the connection appropriate for your components Installing Speakers See "1: Installing speakers" (page 21). v Connecting the monitor and video components The image quality depends on the connecting jack. See the illustration on the right. Select the connection according to the jacks on your components. Digital Analog High quality image Q: Does your monitor have an HDMI jack? t No: See the connection for a TV monitor without an HDMI jack in "2: Connecting the monitor" (page 25) and "Connecting components without HDMI jacks" (page 29). t Yes: See the connection for the TV monitor with HDMI jack in "2: Connecting the monitor" (page 25). Q: Does your video component have an HDMI jack? t No: See "Connecting components without HDMI jacks" (page 29). t Yes: See "Connecting components with HDMI jacks" (page 26). v Connecting the audio components See "4: Connecting the audio components" (page 35). v Setting the audio output settings on the connected components To output multi-channel digital audio, check the digital audio output setting on the connected components. For a Blu-ray Disc Player, check that "Audio (HDMI)," "Dolby Digital (Coaxial/Optical)," and "DTS (Coaxial/Optical)" are set to "Auto," "Dolby Digital," and "DTS," respectively (as of March 2010). For a PlayStation 3, check that "BD Audio Output Format" is set to "Bitstream" (with system software version 3.15). For details, refer to the operating instructions supplied with the connected components. v Preparing the receiver and the remote See "8: Preparing the receiver and the remote" (page 43). v Setting the speakers Select the speaker pattern, then perform auto calibration. For details, see "9: Setting the speakers" (page 44) and "10: Calibrating the appropriate speaker settings automatically (Auto Calibration)" (page 47). Note You can check the speaker connection using "Test Tone" (page 120). If the sound is not output correctly, check the speaker connection and make the settings explained above, again. 20GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	20
Checking the connection appropriate for your components	20
1: Installing speakers	21
2: Connecting the monitor	25
3: Connecting the video components	26
4: Connecting the audio components	35
5: Connecting the IR Blaster	39
6: Connecting the antennas (aerials)	40
7: Connecting to the network	41
8: Preparing the receiver and the remote	43
9: Setting the speakers	44
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	47
11: Configuring the network settings of the receiver	53
12: Preparing a computer to use as a server	53
Guide to on-screen display operation	55
Playback	58
Enjoying sound/images from the component connected to the receiver	58
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	60
Operating the TDM-iP50 using the GUI menu of the receiver	61
Tuning	64
Listening to FM/AM radio	64
Presetting FM/AM radio stations	66
Listening to satellite radio (USA/Canadian model only)	67
Connecting a satellite radio tuner	68
Preparing to listen to a satellite radio	68
Selecting a channel of the satellite radio	69
Presetting satellite radio channels	70
Restricting access to specific channels (Parental Lock)	71
Enjoying Surround Sound	74
Playing back with 2-channel sound	74
Playing back with multi-channel surround	75
Enjoying a surround effect for music	76
Enjoying a surround effect for movies	78
Using Network Features	81
About the network functions of the receiver	81
Enjoying content stored on the server	82
Enjoying the audio of a component connected to the receiver using other device via the home network	85
Using a controller	87
Listening to Rhapsody	88
Listening to SHOUTcast	91
Features of the Setup Manager application software	92
Using Multi-zone Features	94
What you can do with the Multi-zone function	94
Making a multi-zone connection	94
Setting the speakers in zone 2	98
Switching the zone setting of the remote	99
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	99
Using Other Features	102
Using “BRAVIA” Sync features	102
Switching the monitors that output the HDMI video signals	105
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	105
Switching between digital and analog audio	106
Enjoying the sound/images from other inputs (Input Assign)	107
Using the sleep timer	109
Enjoying the surround effect at low volume levels (Night Mode)	109
Recording using the receiver	110
Switching the command mode of the receiver and the remote	111
Using a bi-amplifier connection	112
Adjusting Settings	114
Using the setting menu	114
Auto Calibration	115
Speaker settings	118
Surround settings	122
EQ settings	123
Multi Zone settings	124
Audio settings	125
Video settings	127
HDMI settings	129
Network settings	131
Quick Click settings	133
System settings	134
Operating without connecting to a TV	135
Operating Each Component Using the On-screen Remote (Quick Click)	142
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	142
Using Quick Click	143
Setting components that are operated by the on-screen remote	148
Performing several commands in sequence automatically with Quick Click (Macro Play)	148
Setting remote control codes that are not stored in Quick Click	150
Resetting the remote code for Quick Click	151
Operating Each Component Using the Multifunction Remote	152
Operating each component using the multifunction remote	152
Programming the remote	153
Performing several commands in sequence automatically (Macro Play)	157
Setting remote commander codes that are not stored in the remote	158
Clearing all the contents of the remote’s memory	160
Additional Information	161
Precautions	161
Troubleshooting	162
Specifications	169

Match case Limit results 1 per page

Checking the connection appropriate for your

components

Getting Started

Installing Speakers

See “1: Installing speakers” (page 21).

Connecting the monitor and video

components

The image quality depends on the connecting jack. See the

illustration on the right. Select the connection according

to the jacks on your components.

Q: Does your monitor have an HDMI jack?

No:

See the connection for a TV monitor without an HDMI jack in “2: Connecting the monitor” (page 25)

and “Connecting components without HDMI jacks” (page 29).

Yes:

See the connection for the TV monitor with HDMI jack in “2: Connecting the monitor” (page 25).

Q: Does your video component have an HDMI jack?

No:

See “Connecting components without HDMI jacks” (page 29).

Yes:

See “Connecting components with HDMI jacks” (page 26).

Connecting the audio components

See “4: Connecting the audio components” (page 35).

Setting the audio output settings on the connected components

To output multi-channel digital audio, check the digital audio output setting on the connected components.

For a Blu-ray Disc Player, check that “Audio (HDMI),” “Dolby Digital (Coaxial/Optical),” and “DTS (Coaxial/Optical)” are

set to “Auto,” “Dolby Digital,” and “DTS,” respectively (as of March 2010).

For a PlayStation 3, check that “BD Audio Output Format” is set to “Bitstream” (with system software version 3.15).

For details, refer to the operating instructions supplied with the connected components.

Preparing the receiver and the remote

See “8: Preparing the receiver and the remote” (page 43).

Setting the speakers

Select the speaker pattern, then perform auto calibration. For details, see “9: Setting the speakers” (page 44) and “10:

Calibrating the appropriate speaker settings automatically (Auto Calibration)” (page 47).

Note

You can check the speaker connection using “Test Tone” (page 120). If the sound is not output correctly, check the speaker

connection and make the settings explained above, again.

High quality image

Digital

Analog