Sony STR-DE815G Operating Instructions - Page 27
Playback/Recording
View all Sony STR-DE815G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Playback/Recording To turn off the selected component Click El in the bottom left corner. To turn on the component, follow steps 1 to 3. To turn off all components Press SYSTEM OFF (for USA and Canadian models) or ALL OFF (for other Models) on the remote control. To mute the sound Ea . Lc . Click The icon changes to "MUTING" appears in the display on the front panel. To turn the sound back on, click on the icon again. • For USA and Canada : You can also mute the sound by pressing MUTING on the remote control. "MUTING" appears in the display on the front panel. Press again to restore the sound. t To listen to digital program sources (STR-DE1015G) Click SETUP in the main menu, then click INPUT MODE. INPUT MODE SETTING AUTO DAND AUTO AUTO I t) RETURN lE• EXIT Click the buttons next to each program source to select the audio signals you desire: • AUTO : gives priority to digital signals when there are both digital and analog connections. If there are no digital signals, analog is selected. • ANALOG : selects the analog audio signals input to the AUDIO IN (L and R) jacks. • DIGITAL (OPTICAL) : selects the digital audio signals input to the DIGITAL OPTICAL IN jack. • AC-3 RF : selects the digital RF audio signals input to the DIGITAL AC-3 RF IN jack (LD/DVD only). t To listen to decoded Dolby Digital (AC-3) program sources (STR-DE815/D760Z) Click FUNCTION, then click 5.1 INPUT. The video signal from the LD/DVD VIDEO IN jack is automatically paired with the audio signals from the 5.1 INPUT jacks. When set to this mode, the audio signals bypass the receiver's sound fields. To customize the sound of the 5.1 INPUT, use the controls on your Dolby Digital (AC-3) decoder. To listen to the analog audio signals input to the LD/ DVD AUDIO (L and R) jacks, select LD/DVD from the FUNCTION menu. You can play video and audio components at the same time Play a video component you want, then play audio component. Make sure the AUTO PLAY function is set to off (see page 44). Notes • Components of the same type (e.g., Sony LD player) will be controlled simultaneously by the on-screen controls. • If a component does not respond, it may be because IR codes from the IR emitter are not fully reaching the component. In this case, connect the extra IR repeater (supplied) and position it facing the component (see "Infrared (IR) Repeater Hookups" on page 7). If the IR repeater is already connected, change the position of the IR repeater or program source. • When 5.1 INPUT is selected, sound fields cannot be selected or edited (STR-DE815G and STR-D760Z only). 27