Sony STR-DE815G Operating Instructions - Page 56
Customizing, Receiver, Operations
View all Sony STR-DE815G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Front Panel Operations (Remote Short-cuts: USA and Canada only) Dynamic range compression ratio Initial setting is : D. RANGE CCIMP OFF Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. ■ Speaker level / balance parameters (See page 23 for details) Rear speaker balance Initial setting is : REAR Lets you adjust balance between the rear speakers. Rear speaker level Initial setting is : REAR 0 c Lets you adjust level of the rear speakers. Center speaker level Initial setting is : CENTER 0 dB Lets you adjust the level of the center speaker. Sub woofer level Initial setting is : SUB WOOFER 0 dB Lets you adjust the level of the sub woofer. Surround (SUR) parameters (STR-DE815G / STR-D76OZ) Surround effect level It lets you adjust the "presence" of the current surround effect. Delay time (Dolby Surround mode only) Initial setting is : DELAY 20 It lets you adjust the delay time of the Dolby Pro Logic surround sound. See page 39 for details. Rear speaker level Initial setting is REAR SP 0 de Lets you adjust level of the rear speakers. See pages 24 and 25 for details. Center speaker level Initial setting is :CENT.SP 0 dB Lets you adjust the level of the center speaker. See pages 24 and 25 for details. Customizing the Receiver Operations The menu operations allow you to customize various aspects of the receiver to suit your listening environment, your speakers, your components, and your personal preferences. For the on-screen speaker setup operations, see page 22 (STR-DE1015G) or 24 (STR-DE815G / D760Z). 1 Press SET UP. "SET UP" appears in the display. 2 Press SET UP repeatedly to display one of the following menus: STR-DE10156 SPEAKER SETUP FUNCTION HOOKUP OTHER SETUP STR-DE815G / STR-D760Z CENTER MODE DISPLAY SETUP FUNCTION HOOKUP 3 Use digital processing control buttons ( A / V ) to select the parameter you want. 4 Use digital processing control buttons ( < / > ) to adjust the parameter. 5 Repeat steps 2 and 4 to make all necessary adjustments. 6 Press SET UP twice to exit the set up mode. (continued) 57