Sony STR-DE815G Operating Instructions - Page 46
Adjusting, display, position, screen
View all Sony STR-DE815G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Additional Operations and Settings • To select the display type, click SEE- THROUGH (ON or OFF) and LANGUAGE (ENGLISH, FRENCH or GERMAN). SEE-THROUGH: When set to OFF, the display appears in the factory-set color. When set to ON, all menus and control panels are transparent, with only characters and outlines visible, allowing you to see the contents of video programs. LANGUAGE: This setting lets you specify the language appearing in the on-screen display and the display on the front of the receiver. You can choose between three languages: English, French and German. • To switch the IR OUTPUT setting, click IR OUTPUT ON or OFF. When it is set to OFF, the IR signals are output only from the IR OUT jack on the rear panel. No IR signals will be output from the IR emitter on the front panel. When the IR OUTPUT is set to OFF, "IR OFF" appears in the main menu. Normally, IR OUTPUT should be set to ON. Note Even if you have selected SEE-THROUGH ON, the display changes to the factory set color when there is no video signal being input. When a video signal is input, the display reverts to SEE-THROUGH ON. Adjusting the position of the on-screen display You can adjust the overall position of the on-screen display control panel. 1. Click SETUP in the main menu to display the SETUP menu, then click OSD SETUP. 2 Click OSD POSITION SET. The position adjustment screen appears. OSD SETUP ■ AUTO PLAY • IR OUTPUT ■ AUTO OSD ERASE ■ SEE-THROUGH ■ LANGUAGE ■ POINTER ONLY ■ DEMO ■ S FEELING ■ OSD POSITION LP RETURN ON OFF ON OFF ON OFF ON OFF ENGLISH SET START 12345 SIFT E EXIT 3 Click the borders to adjust the position so you can just see the top, bottom, right and left edges of the border. 1, • E. EXIT 47