Sony STR-DE995 Operating Instructions - Page 15
Voltage Selector - remote
View all Sony STR-DE995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Hooking Up the Components CONTROL S hookup (STR-DE995 only) When making CONTROL S hookups, use a monaural mini-plug cord (not supplied). CONTROL S is an original Sony control system. • If you connect the CONTROL S OUT jack on another component to the CTRL S STATUS IN jack on this receiver. The remote sensor on the CONTROL S OUT component receives remote codes the same way as the remote sensor on this receiver. This is useful if you have placed this receiver in a rack, etc. • If you connect the CONTROL S IN jack on another component to the CTRL S STATUS OUT jack on this receiver. The remote sensor on this receiver receives remote codes the same way as the remote sensor on the CONTROL S IN component. This is useful if you place the other component away from this receiver. 2ND ZONE hookup (STR-DE995 only) You can use the 2ND ZONE OUT jacks to output the audio signals of the selected component to a stereo amplifier located in another room (page 27). Setting the voltage selector If your receiver has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet. VOLTAGE SELECTOR 120V 240V 220V continued 15GB