Sony STR-DE995 Operating Instructions - Page 62
Repeat steps 1 to 5 to control other, components., Press, and MASTER VOL, the same time.
View all Sony STR-DE995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Programming the remote (continued) 6 Repeat steps 1 to 5 to control other components. To cancel programming Press USE MODE during any step. The remote automatically exits the programming mode. To activate the input source after programming Press the programmed button to activate the input source you want. If programming is unsuccessful, check the following: • If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. • If the indicator flashes 4 times in quick succession while entering the numeric code, an error has occurred. Start again from step 1. Notes • The indicator turns off while a valid button is pressed. • In step 2, if you press TV ?/1, only TV VOL +/-, TV CH +/-, TV/VIDEO and WIDE buttons are reprogrammed. • For the numeric codes, only the first three numbers entered are valid. To clear the memory of the remote To clear all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1, AV ?/1 and MASTER VOL - at the same time. The indicator flashes 3 times, then goes off. The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be assigned to a component. If you fail to program your remote using one of the codes, try using other codes. Notes • The numeric codes are based on the latest information available for each brand. There is a chance, however, that your component will not respond to some or all of the codes. • All of the input selectors on this remote may not be available when used with your particular component. To control a CD player Maker SONY DENON JVC KENWOOD MAGNAVOX Code(s) 101, 102, 103 104, 123 105, 106, 107 108, 109, 110 111, 116 MARANTZ ONKYO 116 112, 113, 114 PANASONIC 115 PHILIPS 116 PIONEER TECHNICS 117 115, 118, 119 62GB