Sony STR-DE995 Operating Instructions - Page 40

Other Operations Naming preset stations and program sources You can enter a name (index name) of up to 8 characters for preset stations and program sources. These names (for example, "VHS") appear in the receiver's display when a station or program source is selected. Note that no more than one name can be entered for each preset station or program source. This function is useful for distinguishing components of the same kind. For example, two VCRs can be specified as "VHS" and "8MM", respectively. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/TAPE jacks. 1 To name a preset station Turn INPUT SELECTOR to select FM or AM band, then tune in the preset station you want to create an index name for. If you are not familiar with how to tune in preset stations, see "Tuning to preset stations" on page 38. To name a program source Select the program source (component) to be named. 2 Press MAIN MENU repeatedly to select " CUSTOMIZE ". 3 Turn MENU (STR-DE995 only) or press / (STR-DE895 only) to select "NAME? [XXXXXXXX]". 4 Create an index name by using the +/- (STR-DE995 only) or jog dial (STRDE895 only) and MENU (STR-DE995 only) or press / (STR-DE895 only): Turn the +/- (STR-DE995 only) or jog dial (STR-DE895 only) to select a character, then turn MENU (STR-DE995 only) or press / (STR-DE895 only) to move the cursor to the next position. To insert a space Turn the +/- (STR-DE995 only) or jog dial (STR-DE895 only) until a blank space appears in the display. If you've made a mistake Turn MENU (STR-DE995 only) or press / (STR-DE895 only) until the character to be changed flashes, then turn the +/- (STR-DE995 only) or jog dial (STR-DE895 only) to select the character you want. 5 Press ENTER. 6 Repeat steps 2 to 5 to assign index name for another station or program source. Recording Before you begin, make sure you've connected all components properly. Recording on an audio tape or MiniDisc You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. 1 Select the component to be recorded. 2 Prepare the component for playing. For example, insert a CD into the CD player. 3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary. 4 Start recording on the recording deck, then start playback on the playback component. 40GB