Sony STR-DE995 Operating Instructions - Page 61
Programming the remote, Selecting the command, mode of the remote
View all Sony STR-DE995 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Selecting the command mode of the remote Set the remote command mode using the USE MODE button and scroll key/PUSH. Selecting the command mode You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. 1 Press ?/1 while pressing down USE MODE. 2 Push the scroll key/PUSH towards v or V to select "MAIN". 3 Press PUSH. 4 Push the scroll key/PUSH towards v or V to select "AV1" or "AV2". 5 Press PUSH. The indicator lights once (twice for AV2), then the command mode switches. You will be able to see your selection (AV1 or AV2) in the display. To reset the remote to factory settings Press =/1, AV =/1, and MASTER VOL - at the same time. The indicator lights 3 times, then goes off. Programming the remote You can program the remote to control nonSony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals. 1 Press AV ?/1 while pressing down USE MODE. The indicator lights and IR SET appears in the display. 2 Push the scroll key/PUSH towards v or V to select the input selector (including TV ?/1) for the component you want to control. For example, if you are going to control a CD player, select CD/SACD. 3 Press PUSH. 4 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control. See the tables on pages 62-64 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker's code respectively.) 5 Press ENTER. Once the numeric code has been verified, the indicator slowly flashes twice and the remote automatically exits the programming mode. continued Operations Using the Remote RM-LG112 61GB