Sony STR-DH770 Operating Instructions - Page 40

HDMI Video, iPhone/iPod USB BLUETOOTH General, Power requirements - bluetooth not working

Page 40 highlights

HDMI Video Resolution  480p/60 Hz  576p/50 Hz  720p/60 Hz, 50 Hz, 24 Hz  1080i/60 Hz, 50 Hz  1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz  4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz Support HDCP2.2, HDR, 3D, Deep Color (Deep Colour), ITU-R BT.2020, ARC. iPhone/iPod section BLUETOOTH technology works with iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, and iPod touch (5th and 6th generation). You can use "SongPal" app with this receiver via BLUETOOTH. iPhone/iPod playback via  (USB) port is not possible. USB section Supported format* MP3/WMA/AAC/WAV * Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. Supported USB device Mass Storage Class Maximum current 1 A BLUETOOTH section Communication system BLUETOOTH Specification version 4.2 Output BLUETOOTH Specification Power Class 1 Maximum communication range Line of sight approx. 30 m (98.4 feet)1) Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2) A2DP 1.3 (Advanced Audio Distribution Profile) AVRCP 1.5 (Audio Video Remote Control Profile) SPP 1.2 (Serial Port Profile) DID (Device Identification Profile) Supported Codecs3) SBC4), AAC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 32 kHz, 44.1 kHz, 48 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. 2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. 3) Codec: Audio signal compression and conversion format 4) Subband Codec General Power requirements Area Power requirements USA, Canada, Taiwan Oceania Europe 120 V AC, 60 Hz 230 V AC, 50 Hz 230 V AC, 50/60 Hz Power consumption 240 W Power consumption (during standby mode) 0.3 W or less (When "CTRL HDMI" is set to "CTRL OFF", "STBY THRU" is set to "OFF", and "BT STANDBY" is set to "STBY OFF".) 0.5 W (When "CTRL HDMI" is set to "CTRL ON", "BT STANDBY" is set to "STBY ON", and "STBY THRU" is set to "OFF".) Dimensions (width/height/depth) (Approx.) 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in) including projecting parts and controls Mass (Approx.) 7.8 kg (17 lb 4 oz) Design and specifications are subject to change without notice. 40GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

40
GB
HDMI Video
Resolution
480p/60 Hz
576p/50 Hz
720p/60 Hz, 50 Hz, 24 Hz
1080i/60 Hz, 50 Hz
1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
Support
HDCP2.2, HDR, 3D, Deep Color (Deep
Colour), ITU-R BT.2020, ARC.
iPhone/iPod section
BLUETOOTH technology works with iPhone 6s
Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, and iPod touch (5th and
6th generation).
You can use “SongPal” app with this receiver via
BLUETOOTH.
iPhone/iPod playback via
(USB) port is not
possible.
USB section
Supported format*
MP3/WMA/AAC/WAV
*
Compatibility with all encoding/writing software,
recording devices and recording media cannot be
guaranteed.
Supported USB device
Mass Storage Class
Maximum current
1 A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.3 (Advanced Audio Distribution
Profile)
AVRCP 1.5 (Audio Video Remote Control
Profile)
SPP 1.2 (Serial Port Profile)
DID (Device Identification Profile)
Supported Codecs
3)
SBC
4)
, AAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna’s
performance, operating system, software
application, etc.
2)
BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication between
devices.
3)
Codec: Audio signal compression and conversion
format
4)
Subband Codec
General
Power requirements
Power consumption
240 W
Power consumption (during standby mode)
0.3 W or less (When “CTRL HDMI” is set to
“CTRL OFF”, “STBY THRU” is set to “OFF”, and
“BT STANDBY” is set to “STBY OFF”.)
0.5 W (When “CTRL HDMI” is set to “CTRL
ON”, “BT STANDBY” is set to “STBY ON”, and
“STBY THRU” is set to “OFF”.)
Dimensions (width/height/depth) (Approx.)
430 mm × 156 mm × 329.4 mm (17 in ×
6 1/4 in × 13 in) including projecting parts
and controls
Mass (Approx.)
7.8 kg (17 lb 4 oz)
Design and specifications are subject to change
without notice.
Area
Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Oceania
230 V AC, 50 Hz
Europe
230 V AC, 50/60 Hz