Sony STR-GX808ES Operating Instructions - Page 19
rrininnr
View all Sony STR-GX808ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Receiving Broadcasts Tuning in a Station Directly (Direct Tuning) POWER -► ON 3 . 0 4 4 Enter the frequency with the numeric buttons. rrininnr The entered frequency is displayed. Example 1: FM 102.50 MHz 1 02 50 Example 2: AM 1350 kHz 1 35 4 FM 102.50 Wiz AM 1350 ma 1 Press TUNER. 9 TUNER ST UM Frequency or the station index name you created is displayed. The FUNCTION buttons change to the numeric buttons. 2 Select FM or AM. FM /AM 3 Press DIRECT TUNING. DIRECT TU To correct the entered frequency Repeat steps 3 to 4. For entering AM frequencies You need not enter the last "0". However, if you have changed the AM tuning interval to 9 kHz, enter all the digits. if you enter a frequency not covered by the tuning interval The entered value is automatically rounded up or down'to the closest value covered by the tuning interval. Tuning intervals for direct tuning are the followings: FM: 50 kHz interval AM: 10 kHz interval (changeable to the 9 kHz interval) (See page 5) When the entered frequency does not exist in the receivable frequency range The entered digits (up to 5 digits for FM or up to 3 digits for AM) blink in the frequency display area, and reception does not take place. If this occurs, press DIRECT TUNING again, and enter the correct frequency (the frequency range of the receiver is 87.50 to 108.0 MHz for FM, and 530 to 1710 kHz for AM). When an FM stereo program is noisy When the unit receives an FM stereo program, the STEREO indicator lights on the display. If the stereo program is noisy, press FM MODE to change the mode over the MONO. This eliminates the stereo effect, but the noise will be greatly reduced. To return to the stereo mode, press FM MODE again. 19