Sony STR-KG700 Operating Instructions - Page 13

Getting Started Installing the speakers on the wall You can install your front, center and surround speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker as shown in the illustrations below. 3/16 inch (4 mm) more than 1 inch (25 mm) 3/16 inch (4.6 mm) 13/32 inch (10 mm) Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 7/32 to 9/32 inch (5 to 7 mm). 3 Hang the speakers on the screws. Hook on the back of the speaker 3/16 inch (4.6 mm) 13/32 inch (10 mm) Notes • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 7/32 to 9/32 inch (5 to 7 mm) 13US