Sony STR-KG700 Operating Instructions - Page 40

1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING -. Press TUNING + to scan from low to high; press TUNING - to scan from high to low. The receiver stops scanning whenever a station is received. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display, select monaural audio so that the sound will be less distorted. Press FM MODE repeatedly until the "MONO" indicator lights up on the display. To return to stereo mode, press FM MODE repeatedly until the "MONO" indicator on the display lights off. Direct tuning You can enter the frequency of a station directly by using the numeric buttons. VIDEO DVD/BD SAT TV SA-CD/CD TUNER 1 2CH A.F.D. MOVIE MUSIC DVD/BD MENU 123 3 D.SKIP 456 D.TUNING 789 2 >10 MEMORY AMP MENU 0/10 ENTER CLEAR 4 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 Tip If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. 4 Press ENTER. If you cannot tune in a station Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area. 40US