Sony STR-KG700 Operating Instructions - Page 54
Specifications, AUDIO POWER - watts
View all Sony STR-KG700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 6 ohm loads, both channels driven, from 120 - 20,000 Hz; rated 85 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power Output1) Stereo mode (rated) (6 ohms 1 kHz, THD 1%) 85 W + 85 W Surround mode2) (reference) (6 ohms 1 kHz, THD 10%) RMS output FRONT:133 W per channel CENTER: 133 W SURROUND: 133 W per channel Surround mode2) (reference) (6 ohms 100 Hz, THD 10%) SUB WOOFER: 135 W 1)Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz 2)Reference power output for front, center, surround speakers and sub woofer. Depending on the sound field settings and the source, there may be no sound output. Inputs Analog Digital (Coaxial) Sensitivity: 800 mV/ 50 kohms Impedance: 75 ohms Tone Gain levels ±6 dB, 1 dB step Reproduction frequency range: 28 - 20,000 Hz FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range With 10-kHz tuning scale: 530 - 1,710 kHz3) With 9-kHz tuning scale: 531 - 1,710 kHz3) Antenna Loop antenna Intermediate frequency 450 kHz 3)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down MOVIE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 0.7 A MAX Power consumption Area code Power consumption U 220 W CA 290 VA Power consumption (during standby mode) 0.3 W 54US