Sony UPDR80 Operating Instructions - Page 11

Operation 2 Place the paper roll in the media tray so that the arrow on the label points toward the ink ribbon side. You can load the paper roll in the correct direction by matching the colors of the paper holders inserted into the paper roll with the colors on the media tray. Blue Note Be certain to remove the labels completely. If the labels are not peeled off carefully, they can leave adhesive on the paper. Leaving any of the label in the printer can cause a malfunction. 8 Insert the media tray into the printer. Push the media tray in until it clicks into place. Pink 3 Close the media tray cover so that it clicks into place. Notes • Dropping the media tray while it is loaded with paper and ink ribbon could cause personal injury. Always use two hands when carrying the media tray, supporting the media tray from the bottom. Note Once the paper roll has been loaded, do not touch the printing surface (the inner surface of the paper roll). Fingerprints or sweat on the surface of the paper, or even creases in the paper, could result in poor printing quality. 7 Carefully peel off the adhesive labels from the paper roll in the direction indicated by the arrow. • Removing the adhesive labels before closing the cover can cause a malfunction. • Wind the paper roll if the leading edge of the paper is touching the ink ribbon. If the leading edge of the paper is left resting on the ink ribbon, malfunctions may occur. 11 Before Printing