Sony VPL-DX100 Operating Instructions - Page 31

Cleaning the Air Filter

Page 31 highlights

Cleaning the Air Filter When a message appears on the projected image indicating time for a filter cleaning, clean the air filter (page 26). If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on purchasing/fitting a new air filter, consult with the store where you purchased the projector, or contact qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. 1 Turn off the projector, and disconnect the AC power cord from the AC outlet. 2 Slide out and remove the air filter cover from the unit. 3 Clean the air filter with a vacuum cleaner. Pull out and remove the air filter, and clean it with a vacuum cleaner. Claws Air filter cover Air filter 4 Reattach the air filter cover to the unit. Note Install the air filter with its open weave side facing the bottom of the unit, then place the air filter cover back in the unit. Others Cleaning the Air Filter 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

31
Cleaning the Air Filter
Others
Cleaning the Air Filter
When a message appears on the projected image indicating time for a filter cleaning, clean the
air filter (page 26).
If the dust cannot be removed from the air filter even after cleaning, replace the air filter with
a new one. For details on purchasing/fitting a new air filter, consult with the store where you
purchased the projector, or contact qualified Sony personnel.
If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the
temperature may rise inside the unit, leading to a possible malfunction or fire.
1
Turn off the projector, and disconnect
the AC power cord from the AC outlet.
2
Slide out and remove the air filter
cover from the unit.
3
Clean the air filter with a vacuum
cleaner.
Pull out and remove the air filter, and
clean it with a vacuum cleaner.
4
Reattach the air filter cover to the unit.
Install the air filter with its open weave side
facing the bottom of the unit, then place the
air filter cover back in the unit.
Caution
Air filter cover
Note
Claws
Air filter