Sony VPL-DX100 Operating Instructions - Page 6
Setting the energy-saving mode, easily, Others, Infrared transmitter, BLANK key, MUTING key
View all Sony VPL-DX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
BLANK key Cuts off the projected image temporarily. Press again to restore the previous image. Picture muting helps reduce power consumption. MUTING key Mutes the audio output temporarily. Press again to restore the previous volume. VOLUME +/- key Adjusts the volume output. FREEZE key*2 Pauses a projected image. Press again to restore the image. Notes *1: Use this key when inputting a computer signal. But it may not be used depending on the resolution of the input signal. *2: Use this key when inputting a computer signal. f Setting the energy-saving mode easily ECO MODE key Energy-saving mode can be set easily. Energy-saving mode consists of "Lamp Mode," "With No Input," and "With Static Signal." 1 Press the ECO MODE key to display the ECO Mode menu. ECO Mode Menu ECO Mode ECO User :Sel RETURN : B a ck 2 Press the V/v key or ECO MODE key to select "ECO" or "User" mode. ECO: Sets each mode to the optimum energy-saving value. Lamp Mode: Low With No Input: Standby With Static Signal: Lamp Dimming User: Sets each item of the ECO mode menu as you desire (go to step 3). 3 Select "User" then press the b key. The setting items appear. User Lamp Mode Auto Power Saving With No Input With Static Signal High Off Lamp Dimming :Sel :Set RETURN : B a ck 4 Press the V/v key to select the item then press the ENTER key. 5 Press the V/v key to select the setting value. 6 Press the ENTER key. The screen returns to the previous menu. For details on ECO Mode settings, see "Lamp Mode", "With No Input" and "With Static Signal" on the Connection/ Power menu (page 22). Others g Infrared transmitter About remote commander operation • Direct the remote commander toward the remote control detector. • The shorter the distance between the remote commander and the projector is, the wider the angle within which the remote commander can control the projector becomes. • Make sure that nothing obstructs the infrared beam between the remote commander and the remote control detector on the projector. 6 Location and Function of Controls